test

Two owner unit since new. All records and maintenance logs. Great for C&D, railroad ties, stumps, chunk wood and brush.  Catastrophic damage is unlikely in the event of hitting a contaminant. Includes remote control, magnet, posi-traction pan drives. Extra hydraulic oil cooler and blades. New style chipper grates. Great deal on a very capable grinder.
Asking Price : Auction
Horsepower : 600
Type : Shredders
More to come. This requires three phase power (460v?). Liners and paddles are really new. Runs and operates. Capable of 150 yards per hour or so. We bought it and didn’t hook it up. Owned it for three years. The guy we bought it from bought a bigger unit.
Asking Price : Auction
Horsepower :
Type : Colorizors
Cab and loader. Magnet. Includes updated engine. Runs now so you can see a demo. It’s just been replaced with a horizontal. Would be a good grinder for a guy who wants to process brush or pallets or a few bigger pieces now and then. This is a lot of grinder for the money. Short … Continue reading "1997 Morbark 1200"
Asking Price : Auction
Horsepower : 750
Type : Tub Grinders
Hours are unknown but this was our main grinder until we went with a bigger one. Runs and grinds well. Only usable for regrinding material. 1.5″ and 2″ screens. Magnet.
Asking Price : Auction
Horsepower : 125
Type : Horizontal Grinders
Used. Remote and magnet. Engine is great. Newer exhaust and starter. Will need some TLC. More to follow.
Asking Price : Auction
Horsepower : 375
Type : Horizontal Grinders
Low hour grinder/colorizer. Includes color pump and magnet.  Makes a nice,  consistent mulch product. Will grind and color at the same time. Easily tows with one ton truck. Ready to go. Price of new one is $130k.
Asking Price : Auction
Horsepower : 127
Type : Horizontal Grinders
2016 CP118, Cat 127hp Diesel, conveyor magnet.  Regrind and color mulch at the same time. Low hours. Screens: rectangle, 3.25” wide and 1.5” tall .Runs like new!
Asking Price : Auction
Horsepower : 127
Type : Horizontal Grinders
Actually a 1996 that was probably sold in 1997. The anti-tub grinder. This will take big chunks and stumps as is. Sand and dirt doesn’t wear out the screens. Engine has 300 hours on rebuild. Has the updated arbor disk and holders- that’s a $40k upgrade to buy it. Remote control.  Magnet. 5″ and 3″ … Continue reading "1997 Universal Refiner PDR 80"
Asking Price : Auction
Horsepower : 450
Type : Shredders
This had a CAT overhaul on the engine in 2016. High machine hours but well maintained. The grapple loader was removed prior to our buying it. We ground with it using a wheel loader for years… Runs really well. Cab is still on it as you can see. Will grind today.  Demo available. Price is … Continue reading "2005 Morbark 1300B"
Asking Price : Auction
Horsepower : 860
Type : Tub Grinders
Chip processor for making mulch. Handles regrind extremely well. Magnet. Runs great and colors well. Ready to grind and color mulch now. Can be towed. We think the hours are accurate.
Asking Price : Auction
Horsepower : 110
Type : Tub Grinders
Hardly used GoBagger 250 bagging system. Bought new in 2014. Used sparingly.  Kubota diesel. Has scale, timer and sealer included. Foot controller. Mags mulch, soils, rocks, etc. Trailer mounted. Weighs about 5,500 lbs. Ready to work. (No extra bags are available.)
Asking Price : Auction
Horsepower : 20
Type : Other
Good running whole tree chipper with grapple loader. Roadworthy. Ready to go…
Asking Price : Auction
Horsepower : 875
Type : Other
Good used clean operating machine, many repairs done including approximately $30K in engine repair. Video.
Asking Price : Auction
Horsepower :
Type : Tub Grinders
One owner, very clean, operating machine! Unmolested paint and condition…Ready to go to work.
Asking Price : Auction
Horsepower : 860
Type : Tub Grinders
Gone through: rebuilt trans, reconditioned  mill, newer paint and decals, good used operating machine. Runs well. Video of it grinding available.
Asking Price : Auction
Horsepower : 860
Type : Tub Grinders
We outgrew this unit and it serves as a back up. Doesn’t get used so we’re selling it. Will do 140+ yards per hour. Has an auger system. Newer pan. Runs and colors well. Hours may be accurate but we don’t know for sure. LT245- 75 R16 tires.
Asking Price : Auction
Horsepower :
Type : Colorizors
Slab Chipper. It has a 75hp 480v 3 phase electric motor on it that powers both the rotor and hydraulics. It comes with a 25’ infeed conveyor and a short outfeed conveyor. Makes sawdust very comparable to circle head sawdust. Produces about 2-3 tons per hour. Has around 600 hours but is running everyday. Comes … Continue reading "2018 Salsco SC-12"
Asking Price : Auction
Horsepower : 75
Type : Other
This is an odd one. It has 2 mills in it (56″ and 30″) with twin 250 HP electric motors.  Was bought and stored. The old owner run an air system to blow his product. That system is not and was not included.  You’ll have to study the pics in order to get a better … Continue reading "1976 WHO 512-56"
Asking Price : Auction
Horsepower : 500
Type : Tub Grinders
Model year is estimated. Bad motor. Probably not worth rebuilding. Lots of good solid parts.
Asking Price : Auction
Horsepower :
Type : Tub Grinders
Extremely straight tub grinder with tub cover. Cover can be removed. Swing hammers.  Used at a pallet yard but does not have a magnet.  Was used about a day per week on average. Extra conveyor belting, extra hammers and an extra set of screens. Ready to work this spring!
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Dual shaft shredder. Info coming soon.
Asking Price : Auction
Horsepower :
Type : Shredders
Big horizontal grinder for sale. More info coming soon.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
40′ long x 48″ hydraulic stacker with small hopper.  Model year is estimated.
Asking Price : Auction
Horsepower :
Type : Other
Factory reconditioned in 2010. Knuckle boom loader on the grinder.  Magnet. Augers under the mill. New teeth. Really nice shape. Road and work ready.
Asking Price : Auction
Horsepower : 860
Type : Tub Grinders
Used for a little more than a year. We don’t need it any more. Runs and grinds well. Hours are taken from the grinder. One of the few, small horizontals with a wide opening. Good for pallets, light dimensional lumber, small brush, etc.  Makes a finished mulch product with the right screens. Stacking conveyor stows … Continue reading "1994 Concept Products Shred All D5600"
Asking Price : Auction
Horsepower : 150
Type : Horizontal Grinders
This came as a package with some other equipment over a year ago. We didn’t really use it much but seems to run ok.  Hours are relatively low but we don’t know how many for certain.  Short videos of the mill and inside of the tub upon request.  Note from broker: These little tubs are … Continue reading "1991 Haybuster IG8"
Asking Price : Auction
Horsepower : 110
Type : Tub Grinders
PT Tech clutch, solid cross magnet. Factory Colorizor.  Runs well.  Ready to work.
Asking Price : Auction
Horsepower : 127
Type : Tub Grinders
This is actually a 2005. (It had been labeled a 2006) Great runner. Ready to go to work now.  Remote. CAT evaluation on engine approximately one year ago.  High tooth count rotor.  Owned since ’14 with maintenance records. Used fairly often but not enough to justify having one this big.
Asking Price : Auction
Horsepower : 1000
Type : Horizontal Grinders
Very good track grinder, ready to work, video available. Remote, magnet, reversing fan. Set up for coloring. 10 various screen sizes from demo to mulch.
Asking Price : Auction
Horsepower : 765
Type : Horizontal Grinders
Ready for work. Remote control and magnet. New infeed motor and gearbox, just flipped carbide teeth, just serviced, new discharge conveyor 300 hours ago, new clutch disks, pintle hitch, air brakes, wireless remote works, Gruendler mill. 2.5″ octagon screen set.
Asking Price : Auction
Horsepower : 500
Type : Horizontal Grinders
Virtually new screens. These just didn’t go with the grinder when it was sold.  All hex shaped screens: Approximately 4- 6″, 2-5″, and 4-4″ for a total of 10 or so.  Would prefer to sell all at one time. Located in Wisconsin with one of my great customers.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
Magnet and Fifth wheel hitch. No remote. Runs but will need an engine. Used at a pallet yard. Actual hours are unknown. It has been used in one spot for a few years so the breaks and lights don’t work. Tires are pretty new.
Asking Price : Auction
Horsepower : 460
Type : Horizontal Grinders
Almost new. Great grinder. Remote, magnet. New tires. Ready to grind when you are.
Asking Price : Auction
Horsepower : 575
Type : Horizontal Grinders
Almost new. Comes with extra teeth and colorizing mixer. Remote control, magnet, reversing fan.  Great for skids and brush.
Asking Price : Auction
Horsepower : 240
Type : Horizontal Grinders
Processes approximately 120-140 yards per hour. Stacking conveyor is NOT included.  This is electric. Will need new belly pans soon.
Asking Price : Auction
Horsepower :
Type : Colorizors
This is a very well taken care of, one owner CBI. All maintenance is done in house and done to CBI standards if not better. We have been in the grinding business for over 20 years and we go beyond manufactures standards. Remote, reversing fan, Twin Disc clutch, down swing rotor. The engine has been … Continue reading "1998 CBI 4800"
Asking Price : Auction
Horsepower : 1050
Type : Horizontal Grinders
Heavy swinging hammers. Magnet. New tires. Ready to tow. 25,000 lbs. Bring us an offer.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Lower price!  Every hose has been changed, just because! Clutch, augers and mill have been updated this year.  The only thing on this grinder is a 1″ slice along the stacking conveyor belt.  Otherwise, it’s near perfect. Fixed hammers. NO magnet. Does have remote control and air compressor. Single axle, pintle tow. Roadworthy. Ready to … Continue reading "2007 Morbark 1000"
Asking Price : Auction
Horsepower : 390
Type : Tub Grinders
This grinder was was previously marked as an XL. This is NOT an XL.  Excellent maintenance. Recent new remote control.  $20k in the mill last year.  Feed roll has new bearing. Remote Control and Magnet.  PT Tech clutch.  Reversing fan. Air compressor. Ready to run. I’ve sold stuff for this guy before. It is always … Continue reading "2008 Morbark 3800 TX"
Asking Price : Auction
Horsepower : 700
Type : Horizontal Grinders
Beautiful piece of equipment. Only 4800 Hours. Magnet. Grind Shingles for Asphalt Pavement. Or, Grind Mulch into Sawdust. Corn, Soybeans or Wheat into meal Etc.
Asking Price : Auction
Horsepower : 630
Type : Horizontal Grinders
Start your bagging early.  All of the bells and whistles. Heat, scale, conveyors, water cooled sealer, etc.  Includes 5500 watt generator. Ready to bag just about anything you can think of the easy way. Don’t pay new pricing.
Asking Price : Auction
Horsepower : 206
Type : Other
Small horizontal grinder for sale. Loads the back of a truck like a chipper. Ram fed. Very portable.  Compost, pallets, chips, mulch.
Asking Price : Auction
Horsepower : 127
Type : Horizontal Grinders
Bought it with around 700 hours. Ran it the last 5 years and upgraded to a bigger grinder. Runs well. A list of upgrades to follow:
Asking Price : Auction
Horsepower : 115
Type : Horizontal Grinders
Price reduced! 6600 Woodhog by Morbark. Well cared for to get these hours. Engine is very good. Brand new Twin Disc hydraulic clutch with newer pump and coupler. Overload protection.  Remote control. Magnet. Roadworthy. Grinds well. ($30,000 clutch was just installed.)
Asking Price : Auction
Horsepower : 1050
Type : Horizontal Grinders
Model year is estimated. New soft start. 600Volt motor, vibrating bin dump, shaker deck infeed, 26ft outfeed conveyor with magnetic end pulley, 31ft stacking conveyor and full control panel. Condition is very good and the hammers and drum are in excellent condition. Screen is 1.5″ and also in excellent condition.
Asking Price : Auction
Horsepower : 125
Type : Shredders
Downswing mill. Magnet. Runs. Will need some TLC but a solid, straight grinder. Runs and grinds well the way it is.  Original owner.  Model year and horsepower is approximate until we can confirm.
Asking Price : Auction
Horsepower : 700
Type : Horizontal Grinders
Clean, straight municipal and mulch yard tub grinder. Original paint. Includes grapple and remote control. New Magnet last year. Several updates as the years went on. Fixed hammers. Several screen options.  Tub cover. Air Compressor. Ready to run and pretty roadworthy grinder. You won’t find a nicer ’04.  Will consider offers!
Asking Price : Auction
Horsepower : 455
Type : Tub Grinders
Runs great.  Magnet. Pintle Hitch.  2″ square (1 set) included. 78 swinging hammers (3/4″ wide on 15/16″ rods). Newer conveyor belts. Newer mill box work.  Actual hours unknown. We probably put 1000 hours on it in 7 years.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Very Good condition, well maintained with approximately 600 hours. Starts right up and is ready to work. No magnet. 3/4” square screen.
Asking Price : Auction
Horsepower : 86
Type : Horizontal Grinders
Like new condition. 216 hrs. Hardly used after housing crash in ’08. Remote control (open/close, jam, forward/reverse and E stop). Magnetic head pulley. Kept inside. Never rained on. Will process cement block, wood, shingles, sheet rock (drywall). Roadworthy. Pintle tow. Approximately 10,000 lbs.
Asking Price : Auction
Horsepower : 124
Type : Horizontal Grinders
Shingle and wood grinder. Ran approximately 300 hours of shingles with it. Magnet, Remote Control, Compressor. New Infeed Floor/Chain, Main Bearings and Clutch. 500 Hours on engine. 2″ Baffled Screen. Ready to grind.  Will consider offers.
Asking Price : Auction
Horsepower : 540
Type : Horizontal Grinders
Newer tires. Good engine and clutch. Remote Control and Magnetic Head Pulley. Morlift 450 Grapple Loader. Decent Cab with Joystick Controls. The 3412 should be at least 860 HP. Pony engine to run hydraulics should be around 120 HP. Horsepowers are estimated until we get better information.  Serviced and ready to run.
Asking Price : Auction
Horsepower : 860
Type : Tub Grinders
Parts Include: C32 – 2000 hours Screens Mill Bed Chains Clutch Tracks All pumps and planetary gears Full yoke set up
Asking Price : Auction
Horsepower : 1200
Type : Horizontal Grinders
No Image
10′ tub with 200 HP. Newer mill. Used to grind pallets for the last several years.  Would do well for small hay guy if you set up the grinder correctly. Short videos available. Pictures coming soon.
Asking Price : Auction
Horsepower : 200
Type : Tub Grinders
Good over all grinder for land clearing, pallets, C&D, etc. Not too small but still good on fuel with the Cummins. Has been towed recently.
Asking Price : Auction
Horsepower : 630
Type : Horizontal Grinders
This is a decent grinder on tracks that doesn’t take an army to haul.  Grinds well. Mill is in good shape. It needs a good bath. Priced right.
Asking Price : Auction
Horsepower : 525
Type : Horizontal Grinders
Price Drop. Remote control and magnet. Almost all redone or upgraded with receipts. Ready to tow and grind.
Asking Price : Auction
Horsepower : 365
Type : Horizontal Grinders
Nice used trommel screen that we don’t use any more. Fines and overs conveyosr. Great shape.
Asking Price : Auction
Horsepower :
Type : Other
Great machine, we have 20′ of vibrating conveyor in front of the machine and a short conveyor belt that go with the machine. It has been a great machine for us, we are just changing and expanding our operation.  NO magnet.  2.5″ square screen included. Installed and operational.
Asking Price : Auction
Horsepower : 150
Type : Horizontal Grinders
Chipper mill set up. You can convert this to a conventional mill. Nice condition. Radio remote control. 35 in. x 60 in. Opening, 60 in. x 20 ft. Infeed & 48 in. x 30 ft. Discharge Conveyors, 39’ Overall Length, with Remote Control.  No Magnet. Chip thrower. Complete service. Ready to go.
Asking Price : Auction
Horsepower : 700
Type : Horizontal Grinders
Last Six Months ($55,000): Transmitter/Receiver, Infeed Chains, Overlaid infeed with 1/4″ Dura Blaze, Belly Belt, Rebuilt Planetary Motor on Feed Wheel, Heui Pump, Injectors, Hammers, Rakers, Rods, Batteries, Hydraulic Oil, Total service.  Includes multiple grates, rods and hammers. Call for video.
Asking Price : Auction
Horsepower : 860
Type : Horizontal Grinders
190 Hours. Like new! New hammers.  Has remote and magnetic head. Reversing fan. Good clutch. Torque limiter.  Long, folding conveyor. 2 and 4″ screens.  Exceptionally nice grinder.
Asking Price : Auction
Horsepower : 213
Type : Tub Grinders
Engine was rebuilt at one time. Cutch is newer. Tub cradle and rollers are newer.   Fixed hammers. Tub governor may not work (Would need some upgrades before towing too far but isn’t bad.) Magnet.
Asking Price : Auction
Horsepower : 500
Type : Tub Grinders
Newer clutch. Newer radiator.  Magnet. Swing hammers.  Tub governor may need fixed. Should be put on a trailer to haul any distance.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Nice grinder, tilt tub, swing hammers, also includes extra screens. Pintle hitch. NO Magnet. Engine was replaced at some point by municipality that owned it before us. Screens: 2 -1inch  1- 2 inch 1 -3inch I also have an additional  3 inch that is damaged,  but maybe repairable.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Morbark 4000-P is easy to setup and operate. It has simple controls for managing colorant, water and material flow. Three feed augers and two mixing augers, along with 14 replaceable colorant nozzles ensure complete, consistent coloring of material. Up to 150 yards per hour. Machine is in complete working order. Optional 2- 3,000 gallon water tanks and … Continue reading "1999 Morbark 4000P"
Asking Price : Auction
Horsepower : 80
Type : Colorizors
Coming soon. Located west of Mississippi River.
Asking Price : Auction
Horsepower :
Type : Tub Grinders
Remanufactured in 2002/03. Frame hours are unknown. Engine has 4,000 hours on overhaul. Newer clutch. Extremely solid maintenance over the years. These grinders aren’t exactly tub grinders, horizontal grinders or shredders. They are more durable, maintenance friendly and grind the nasty stuff with less horsepower than anything you can name.
Asking Price : Auction
Horsepower : 450
Type : Tub Grinders
Most all cylinders have been reconditioned (seals/chrome, etc).  New mill box. Good duplex mill and good belts. Remote and magnet. Clutch is a PT Tech (hpto) that was added as an upgrade. Cab and grapple. We don’t use the cab or grapple. Paint is about a year old. Newer tires and roadworthy.
Asking Price : Auction
Horsepower : 525
Type : Tub Grinders
Reversing fan, remote, hpto clutch. Mill bars are loose now but still works.   Magnet. Newer feed roll. Conveyor belt has a hole but is newer too. Roadworthy except for a couple of tires. We only use it on the yard. Considering offers.
Asking Price : Auction
Horsepower : 630
Type : Horizontal Grinders
Like new, 4012 tub grinder for sale with grapple loader. Rod puller, air compressor, remote control, magnet. Really nice cab with heat, a/c, stereo.  Gieser plate.  Radial stacking conveyor.  7″ diameter mill shaft with 2″ rods. HPTO clutch (PT Tech) that you can engage in the cab. If you haven’t seen a big Duratech Tub … Continue reading "2016 Duratech 4012"
Asking Price : Auction
Horsepower : 950
Type : Tub Grinders
Remote control. Infeed, infeed chains, conveyor belts are all good.  Magnet. Feed roll could use some new teeth but wasn’t necessary for our grinding. Newer hammers and some extra hammers and screens. Tires are good and roadworthy.
Asking Price : Auction
Horsepower : 1000
Type : Horizontal Grinders
Good running, older pallet grinder.  Works well for brush and chips. Remote and Magnet. 28 tooth rotor. Some newer teeth and bearings. Drive belt and brakes replaced. Demo screen and 2″ square with baffles.  Runs smooth with good power.  Feed roll teeth could use some work. Single axle semi truck is available.
Asking Price : Auction
Horsepower : 435
Type : Horizontal Grinders
Used track tub grinder for sale. New CAT engine. Good hammers, pumps, hoses and motors.  Long conveyor.
Asking Price : Auction
Horsepower : 1000
Type : Tub Grinders
Rare, used, track tub grinder. Remote control. Stacking conveyor. Fluid coupler. Newer tub chain.
Asking Price : Auction
Horsepower : 1000
Type : Horizontal Grinders
7600A. $45,000 upgrades and improvements done over 2 years.  Magnetic head pulley, remote control, radial conveyor, .5″ and 2″ sets screens included.  Demo available.
Asking Price : Auction
Horsepower : 1000
Type : Horizontal Grinders
Newer clutch and injectors.  No magnet. Swinging hammers. Used often so it runs well. All books and service records. Hour meter is fogged and can’t read.  Tows easily with a one ton truck. Pintle hitch.  Video available.
Asking Price : Auction
Horsepower : 110
Type : Tub Grinders
New electronics, new transmision, rebuilt starters, completely checked out by CBI mechanics and is in excellent running order and ready to work. Mill has been refreshed with pockets, teeth…Reversing fan, remote control, magnet and metal detection. Owned by one guy for about the first 14 years.  As you can see the grinder shows well and … Continue reading "2001 CBI Magnum Force 4000"
Asking Price : Auction
Horsepower : 1100
Type : Horizontal Grinders
Used daily so hours may change. ( this time of year) We are unsure of actual hours for we bought it used. long conveyor to load live floor trailers. air brakes. (we don’t haul it on the the highway , but we move it around our yard regularly. comes 4 inch screens 2 inch screens … Continue reading "1995 WHO p10"
Asking Price : Auction
Horsepower : 325
Type : Tub Grinders
Good runner. Grapple loader works well. It has the duplex drum hammer mill assembly.  It has the magnet.  There are 2 2.5″ round screens, 1 3″ round screen, 1 4″round screen and a screen that was 6″ round, but has been cut to be bigger. Tub might be a little out of round. Video and … Continue reading "2000 Vermeer TG525"
Asking Price : Auction
Horsepower : 525
Type : Tub Grinders
High speed grinder- hammer mill. Top feed hopper set up for vertical feed and lower air discharge. Air system is NOT available. Never really used much. Hopper is available just no pics. Control panel is there (soft start might be there too). Model year is approximate.
Asking Price : Auction
Horsepower : 75
Type : Horizontal Grinders
Load like a horizontal and grind like a tub. A hopper feeds an incline conveyor.  The conveyor drops onto a heavy rotor (mill). Twin Disc clutch is about a year old. Good for regrind and high production processing.  Should make an excellent shingle grinder.  Weighs 92,000 lbs.
Asking Price : Auction
Horsepower : 1000
Type : Horizontal Grinders
Ugly but strong bandit beast 3680. Kevlar belts, recent clutch plates on Twin Disc but will need clutch pack soon, lots of spares, radio remote  and tether. We believe the engine was a re-manufactured unit. Magnet. Pintle tow.  Towed recently.  1″ and 6″ screens. Our best information is 7,000 frame hours.   VIDEO AVAILABLE: https://drive.google.com/file/d/0B7K4UWALBeu4UlVHdl9oZ0M5dkE/view?usp=sharing  
Asking Price : Auction
Horsepower : 500
Type : Horizontal Grinders
No Image
Decent 10′ tub with swinging hammers. NO Magnet. Engine is really nice and the clutch was redone about 4-5 years ago and haven’t used it all that much since. Pictures coming soon.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Horizontal Grinder Packer 750 120HP VM Diesel engine 1.5″ & 2″ screens Hopper dimensions: 26″W x 72″L x 24″D Hopper is loaded from the top, the door closes. Material is then forced into the drum grinder and exits out the discharge conveyor. Great for grinding construction waste. Machine has a remote for all phases of … Continue reading "Packer 750"
Asking Price : Auction
Horsepower : 130
Type : Horizontal Grinders
This tub grinder is a very powerful machine an works well.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Nice used CBI horizontal grinder for sale. Has an extremely expensive, rare earth magnetic head pulley (head magnet). It is very strong and hard to find. Remote control and Twin Disc dry clutch. Engine has about 1,000 hours since CAT overhaul. Infeed belt is new and stacker belts are about a year old. This is … Continue reading "2000 CBI Magnum 4000"
Asking Price : Auction
Horsepower : 880
Type : Horizontal Grinders
Used tub grinder without a grapple loader. All of the horsepower goes to the mill. Magnet.  Has the more desirable duplex drum/mill.  Clutch was new shortly before the engine went.  Well maintained grinder. Engine needs rebuilt.
Asking Price : Auction
Horsepower : 525
Type : Tub Grinders
2002 Vermeer HG525 Horizontal Grinder for sale. Infeed chain and pto clutch are really new. Cylinders on conveyor have all been repacked. Grinds well. Does have magnet, reversing fan and new teeth/tips. No remote.  Short videos available.
Asking Price : Auction
Horsepower : 525
Type : Horizontal Grinders
Used track horizontal grinder for sale. Twin Disc clutch: HP600. Folding conveyor. Remote control. No magnet. Street pads. Good hours and the right horsepower.
Asking Price : Auction
Horsepower : 700
Type : Horizontal Grinders
Horizontal track grinder for sale.  PT Tech clutch: HPT014TD. Remote, reversing fan. No magnet. Grouser tracks. Low hours.
Asking Price : Auction
Horsepower : 525
Type : Horizontal Grinders
Original owner. Great grinder for turning small landscape debris and branches into mulch. Magnetic head pulley. 15″ x 17″ opening. Nice for contractors, small landscape/tree projects and very portable. Roadworthy. Screens included.
Asking Price : Auction
Horsepower : 86
Type : Horizontal Grinders
Owner rental available. This horizontal grinder was rebuilt from front to back, including CAT engine by CAT dealer, in 2016. Mill and bearing updates in 2017. No remote control. NO Magnet. 8″ diameter rotor shaft and 48″ high feed opening.  Twin Disc 318 clutch. Roadworthy and ready to run today.  6″, 1.5 and .375 included. … Continue reading "2001 Morbark 5600"
Asking Price : Auction
Horsepower : 860
Type : Horizontal Grinders
Nice used 8′ tub grinder for sale. Under 1,000 hours. Extended flair for larger buckets. No magnet. Runs well. Needs new hammers and  (maybe) new rods. Tub governor is there but not sure if it works. The blank “screen” is worn through and needs replaced. That’s a welding job that should take a day.
Asking Price : Auction
Horsepower : 110
Type : Tub Grinders
Good condition, new stacking belt goes along with it. Magnet on lower conveyor section. Ground pallets. Will grind slabs. Meter shows 800 hours.  We can’t say for sure on the hours but there isn’t a lot of wear on the grinder. Roadworthy but may to change tires. (215-75 r17.5)  Video available.
Asking Price : Auction
Horsepower : 260
Type : Horizontal Grinders
Excellent, big tub grinder with a grapple loader. Grapple is joystick controlled, continuous rotation and 1/3 cord claw. KPTO clutch. 32 Fixed hammers, 2 bolt tips. New main, control panel and engine wiring harnesses. All hydraulic hoses on boom replaced.  New alternator and tub pressure switch. Paint and decal set. Ready to grind.
Asking Price : Auction
Horsepower : 1050
Type : Tub Grinders
Grinder is in good condition, comes with a replacement bed knife and a set or two of replacement teeth and bolts. Teeth are square and can be turned four times. 460V 3 phase power. Control panel and soft start included.  Approximately 30′ of 24″ wide shaker tray before grinder, small 10′ or so outfeed conveyor … Continue reading "2008 Weima WLH Tiger 600"
Asking Price : Auction
Horsepower : 60
Type :
West Salem vibrating infeed table. 60″ x 30′ with punch plate screen. Screen holes are approximately 3/4″ diameter. Is in very good condition. Fines dump out the long side. Very heavy unit. Ready to run.
Asking Price : Auction
Horsepower : 50
Type : Other
Variable speed knife sharpener. Higher HP knife sharpener by Simonds. 460V 3 phase. Only used for about 2-3 years. 66″x 30″ x 32″ H. Can demo. Ready to go.
Asking Price : Auction
Horsepower : 5
Type : Other
Similar to a Jackson shaving mill. Double Box, slower speed, 4 x 30 HP motors. Was reworked and installed around 2004 (actual year is unknown). Shavings drop down to a Patz barn cleaner, up to a screener, then to a chopper box (17’x8’6″).  460 3 phase. 30″ knives. Soft start and controls included. Demo possible.
Asking Price : Auction
Horsepower : 120
Type : Other
Used Mill (Rotor) from 2002 MC266 Rotochopper. Was used for pallets. Replaced with a raker mill. This is a decent mill and would be good for an older grinder that you didn’t want to use much or just need a reasonable mill to get you going. Does NOT include bearings.
Asking Price : Auction
Horsepower :
Type : Other
This is a 60 HP low rpm Horizontal grinder. It comes with a blower and the blower connects to the grinder with a pipe. It has top and bottom infeed rolls. Overall lightly used, in really good shape. Width capacity is around 30″ maybe even wider.
Asking Price : Auction
Horsepower : 60
Type : Horizontal Grinders
This hammer mill was a rebuild direct from Schutte. It is in extremely good condition with only 40 original hours. It comes with an 8′ infeed conveyer, 440 volt soft start and the 75HP Hammermill/Grinder with a 1.5 or 2″ screen.
Asking Price : Auction
Horsepower : 75
Type : Other
Daily runner. New clutch pack in 2016. Has a Magnet. Includes grapple with cab. (Grapple is almost never used but works.) Augers under the mill. Belt is in average condition. Demo available.
Asking Price : Auction
Horsepower : 750
Type : Tub Grinders
Price Drop!  HG6000 Vermeer Horizontal Grinder. This is group of 18 screens to be sold separately or for the one price. Pricing for the nicer screens is $1500 and $800 for lesser.  Located in Ohio. One piece screens. Sizes range from 1.25″ round to 4″ square. Some have a few cracks or are worn to … Continue reading "Vermeer HG6000 Screens"
Asking Price : Auction
Horsepower :
Type : Other
64 swing hammers set up for bedding size material. Magnet. Newer clutch. Tilt tub, pintle tow, roadworthy. 3/4″ and 2″ sets of screens.
Asking Price : Auction
Horsepower : 300
Type : Tub Grinders
Complete rebuild. Virtually every part…No controls or soft start. The motor and the mill for sale. Drop in feeder system.
Asking Price : Auction
Horsepower : 400
Type : Horizontal Grinders
Mellinium mill for Duratech HD14 tub grinder. New, never installed. Estimated weight is 13,000 lbs. Call for more details.
Asking Price : Auction
Horsepower :
Type : Tub Grinders
No Image
Complete C&D Processing System for sale. #16 grizzly feed conveyor, #18 grizzly discharge conveyor, #19 stacking conveyor, #20 cross belt magnet. Refer to item number. See 2 more listings for more pics.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
No Image
Complete C&D Processing System for sale. #9 grizzly feed conveyor, #12 cross belt magnet, #14 Bi-directional conveyor w/metal detetor, #15 fines conveyor. Refer to item number. See 2 more listings for more pics.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
No Image
Complete C&D Processing System for sale. #2 feed hopper, #3 picking conveyor, #4 wood conveyor, #5 wood conveyor, #6 electro overband magnet, #7 metal conveyor. Refer to item number. See 2 more listings for more pics.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
Total rebuild on engine, clutch. Several new parts: turbo, hydraulic pump, tub drive, chain, sprockets, belts, almost all hydraulic hoses… Mill is in great shape. Won’t find a nicer one. Full list available. Will consider offers!
Asking Price : Auction
Horsepower : 525
Type : Tub Grinders
No Image
Great stump grinder. Nothing better than a Universal for processing stumps. Works every week. Remote Control, Magnet, Rebuilt Torque Limiter and rebuilt the wear plate under the arbor. Several new belts. Ready to run. Video available.
Asking Price : Auction
Horsepower : 750
Type : Tub Grinders
Remote, Reversing Fan, PT Tech Clutch, Dual Feed drives, Rod Puller, Air Compressor, Magnet. Recently had New Belly Belt and Feed Wheel Gear Box. Three Axles.
Asking Price : Auction
Horsepower : 630
Type : Horizontal Grinders
Toro ProGrind 4000 with a new retro fit 2008 Detroit 550hp engine in 2009. The machine caught on fire under the cab and burnt out the cab[and all wiring] but the rest of the machine was unharmed. It’s a Parts tub grinder.
Asking Price : Auction
Horsepower : 550
Type : Tub Grinders
Packer 750 Horizontal Grinder, 6 Cyl Diesel water cooled low oil/water protection. Radio remote controlled. Magnet.  1.1 yard 72″ x 26″ hopper. Good for C&D or new construction debris.  Will take concrete block (will NOT take big chunks of concrete).
Asking Price : Auction
Horsepower : 125
Type : Horizontal Grinders
2006 Model Year. Small used horizontal grinder that can be hand-fed. Hour meter not working.
Asking Price : Auction
Horsepower : 86
Type : Horizontal Grinders
Fines conveyor and Overs conveyor. Radial stacker. Ready to run.  Spec sheets available for unit now. 1/2″ screen.
Asking Price : Auction
Horsepower : 174
Type : Other
Grind gnarly wood and shingles without the heavy wear of high-speed grinders. It doesn’t grind against a screen. Arbor spins like a record player. 30-40 tons of shingles per hour w/little water. Includes shingle package, long conveyor & magnetic pulley. Wood option is very similar. It will run large stumps at 50 yards per hour. … Continue reading "2018 Universal Refiner TDR90 Rascal"
Asking Price : Auction
Horsepower : 275
Type : Tub Grinders
Straight, small used tub grinder for light brush or regrind. This model can be used for hay grinding (grinding hay).
Asking Price : Auction
Horsepower : 200HP
Type : Tub Grinders
Includes vibratory feed conveyor with metal detector. Set up for blower discharge. Includes control panel. Does NOT have a soft start. Will send video of machine in operation on request.
Asking Price : Auction
Horsepower : 75
Type : Horizontal Grinders
New Price!  Gasoline powered. F110-P Flowrate Indicator -Briggs and Stratton Engine, Model#121337 -Vector Peristaltic Pump Model 2004 (Approx 200Gallons/Hr Supports all HP’s) -RedLion Rate Meter, Model PAXLR-PAX
Asking Price : Auction
Horsepower :
Type : Colorizors
Ready to work now!  We ran 6,000 yards of bark each year for the last few years and just don’t need this much grinder. Morlift 400 grapple loader. New Cotter gear box was $32k. Engine overhauled 400 hours. Newer hammers, rods, bearings, augers, etc. Too much to list. Tub lid. 7 screens from 3/4″ and … Continue reading "1998 Morbark 1300L"
Asking Price : Auction
Horsepower : 866
Type : Tub Grinders
Price drop! Good condition. Remote control, magnet, extra screens. Possible trade: Front End loader with long forks and log clamp, knuckle boom log loader (could be off a trailer), Skid Steer (tracks), Pneumatic Forklift 4k lb range.
Asking Price : Auction
Horsepower : 900
Type : Horizontal Grinders
Newer belts. Several used screens. Magnet and remote control. Needs some motor work. More coming!
Asking Price : Auction
Horsepower : 800
Type : Tub Grinders
Just reduced $10k to sell.  Used or preowned Morbark 3800 Chip Mill conversion kit or package. Nearly new! Everything you need: knives, plates, hardware…Does NOT fit 3800XL. Also, there is a set for a 4600 Morbark.
Asking Price : Auction
Horsepower :
Type : Horizontal Grinders
Rebuilt Cat 3412E – Only 100 hours since rebuild. Approx. 7,000 frame hours. Cab and loader. Magnetic head pulley. Remote control system. Demo available.
Asking Price : Auction
Horsepower : approx 850 HP
Type : Tub Grinders
As of September 2018, these drums are available.  Drums for Protogrind 1200 shredder. Some were sold by Duratech.
Asking Price : Auction
Horsepower :
Type : Shredders
Used to grind phone books. Electric 3 ph.
Asking Price : Auction
Horsepower : 10075
Type : Shredders
Fire damage to rear of machine. Repairs not completed yet. Engine NOT damaged and is a strong runner. Needs new axles, rear conveyor, hydraulics & wiring to rear.
Asking Price : Auction
Horsepower : 980
Type : Tub Grinders